00800 222 99 222

Valtitan Needle File, Barrette, Cut 0

Valtitan Needle File, Barrette, Cut 0 - 1 piece

Valtitan Needle File, Barrette, Cut 0 - 1 piece

Valtitan Needle File, Barrette, Cut 0 - 1 piece

Valtitan Needle File, Barrette, Cut 0 - 1 piece

Picture may vary from actual product.

Item number G30336

1 piece

will be ordered, not in stock

Questions about the product

Swiss cut. With special surface coating. Especially suitable for hard materials like stainless steel, titanium and nickel alloys, copper/tungsten alloys, acrylic etc.

Advantages:

High surface hardness of 72 HRC;
Materials considered impossible to be filed can be worked on without breaking the teeth;
No clogging, simple beating is sufficient to remove chips from the cut;
Rustproof.

Total length 180 mm
length of cut approx. 100 mm
Barrette
Tapered
cross section 5.4 x 2.0 mm
Cut 0

File Cross Section:	Barrette
German cut number:	0

Recommendations

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Valtitan Needle File, Barrette, Cut 2

available, in stock

Item no.: G30337

1 piece

Valtitan Needle File, Half-Round, Cut 2 - 1 piece

Valtitan Needle File, Half-Round, Cut 2

will be ordered, not in stock

Item no.: G30345

1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.9 mm - 1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.9 mm

available, in stock

Item no.: G394509

1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 2.0 mm - 1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 2.0 mm

available, in stock

Item no.: G394520

1 piece

Last seen products

Ear Stud, 925Ag, ø 5 mm, with Pearl Cup Smooth - 1 piece

Ear Stud, 925Ag, ø 5 mm, with Pearl Cup Smooth

available, in stock

Item no.: G89106

1 piece

Ceramic Crucible A100.425, Uncoated - 1 piece

Ceramic Crucible A100.425, Uncoated

available, in stock

Item no.: 41577

1 piece

Diatemp Twist Polishing Brushes, Grey, Fine, ø 17.0 x 1.6 mm - 1 piece

Diatemp Twist Polishing Brushes, Grey, Fine, ø 17.0 x 1.6 mm

available, in stock

Item no.: 64553

1 piece

Gewindemutter, 585 G, ø 6,0 mm - 1 Stück

Gewindemutter, 585 G, ø 6,0 mm - 1 Stück

available, in stock

Item no.: G90967

1 piece

Ohrstecker, 333 G, Zirkonia weiß, ø 5,50 mm - 1 Paar

Ohrstecker, 333 G, Zirkonia weiß, ø 5,50 mm - 1 Paar

available, in stock

Item no.: G94424

1 pair

Curb Chain, 333G, 1.05 mm, 45 cm - 1 piece

Curb Chain, 333G, 1.05 mm, 45 cm

available, in stock

Item no.: GC10045002

1 piece