+49 9708 909-705

Valtitan Needle File, Barrette, Cut 2

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Picture may vary from actual product.

Item number G30337

1 piece

available, in stock

Questions about the product

Swiss cut. With special surface coating. Especially suitable for hard materials like stainless steel, titanium and nickel alloys, copper/tungsten alloys, acrylic etc.

Advantages:

High surface hardness of 72 HRC;
Materials considered impossible to be filed can be worked on without breaking the teeth;
No clogging, simple beating is sufficient to remove chips from the cut;
Rustproof.

Total length 180 mm
length of cut approx. 100 mm
Barrette
Tapered
cross section 5.4 x 2.0 mm
Cut 2

File Cross Section:	Barrette
German cut number:	2

Recommendations

Needle File, Barrette, Cut 3 - 1 piece

Needle File, Barrette, Cut 3

available, in stock

Item no.: G30261

1 piece

Valtitan Needle File, Flat Hand, Cut 2 - 1 piece

Valtitan Needle File, Flat Hand, Cut 2

will be ordered, not in stock

Item no.: G30333

1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.6 mm - 1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.6 mm

available, in stock

Item no.: G394506

1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.9 mm - 1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.9 mm

available, in stock

Item no.: G394509

1 piece

Last seen products

Zirconia, Light Yellow, Princess Cut, 15.00 x 15.00 mm - 1 piece

Zirconia, Light Yellow, Princess Cut, 15.00 x 15.00 mm

available, in stock

Item no.: GA32028150

1 piece

Chaton, 585 WG, Stein-ø 3,8 mm, 6 Stotzen, Stift - 1 Stück

Chaton, 585 WG, Stein-ø 3,8 mm, 6 Stotzen, Stift - 1 Stück

available, in stock

Item no.: G98933

1 piece

K9 Handpiece 4930 - 1 piece

K9 Handpiece 4930

available, in stock

Item no.: 50684

1 piece

Round Milling Cutter, Fig. 41, ø 4.0 mm - 1 piece

Round Milling Cutter, Fig. 41, ø 4.0 mm

available, in stock

Item no.: G391040

1 piece

Steel Cable Neck Wire, ø 0.90 mm, 45 cm - 1 piece

Steel Cable Neck Wire, ø 0.90 mm, 45 cm

available, in stock

Item no.: G97155

1 piece

Tool Stand, Blue - 1 piece

Tool Stand, Blue

will be ordered, not in stock

Item no.: G31601

1 piece