+49 9708 909-700

Valtitan Needle File, Barrette, Cut 2

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Valtitan Needle File, Barrette, Cut 2 - 1 piece

Picture may vary from actual product.

Item number G30337

1 piece

available, in stock

Questions about the product

Swiss cut. With special surface coating. Especially suitable for hard materials like stainless steel, titanium and nickel alloys, copper/tungsten alloys, acrylic etc.

Advantages:

High surface hardness of 72 HRC;
Materials considered impossible to be filed can be worked on without breaking the teeth;
No clogging, simple beating is sufficient to remove chips from the cut;
Rustproof.

Total length 180 mm
length of cut approx. 100 mm
Barrette
Tapered
cross section 5.4 x 2.0 mm
Cut 2

File Cross Section:	Barrette
German cut number:	2

Recommendations

Needle File, Barrette, Cut 3 - 1 piece

Needle File, Barrette, Cut 3

available, in stock

Item no.: G30261

1 piece

Valtitan Needle File, Flat Hand, Cut 2 - 1 piece

Valtitan Needle File, Flat Hand, Cut 2

will be ordered, not in stock

Item no.: G30333

1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.6 mm - 1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.6 mm

available, in stock

Item no.: G394506

1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.9 mm - 1 piece

Bessemer Steel Twist Drill, Fig. 203, ø 0.9 mm

available, in stock

Item no.: G394509

1 piece

Last seen products

Airflex Polisher, Fine, ø 22.0 x 3.0 mm - 10 pieces

Airflex Polisher, Fine, ø 22.0 x 3.0 mm

available, in stock

Item no.: G41293

10 pieces

Bead Cord NylonPower, Red, No. 3 - 2 m

Bead Cord NylonPower, Red, No. 3

available, in stock

Item no.: G9389113

2 m

Zirconia, Pink, ø 6.0 mm, Parachute Cut - 1 piece

Zirconia, Pink, ø 6.0 mm, Parachute Cut

available, in stock

Item no.: GA32002060

1 piece

Baumwollbeutel, medium, sand, 120 x 170 mm - 1 Stück

Baumwollbeutel, medium, sand, 120 x 170 mm - 1 Stück

available, in stock

Item no.: G71643

1 piece

Lobster Clasp, 585G, 7 x 11,5 mm - 1 piece

Lobster Clasp, 585G, 7 x 11,5 mm

available, in stock

Item no.: G90423

1 piece

TC Cylinder Milling Cutter, Fig. 21, ø 0.8 mm - 1 piece

TC Cylinder Milling Cutter, Fig. 21, ø 0.8 mm

available, in stock

Item no.: G326008

1 piece